Here you’ll find useful files for designers, makers and 3D printing projects.
Drilling jig for converting an FB5 deck to a G3 or G3-R truck mounting pattern (.STEP and .STL files)
DXF file for designing your own Darkslide 84×25 V2 footpad. Also functions as a drilling jig for G3/G3-R, FB5, FB5X, Otherbord MP1, SBX1 and SBX2 truck/ caster mounting patterns.
Note: The G3 mounting pattern is 71.5 mm wide, while the FB5X pattern is 70 mm. I designed the jig with a width of 71 mm as a compromise between the two. Drill the holes slightly larger than 5 mm to ensure a proper fit.
G3(-R) RISERS – .STL files for printing 2,5 and 5 mm risers with a flat and concave profile.
Otherboard MP1 Risers – .STL files for printing 2.5, 5, 7.5, and 10 mm risers with a flat profile.
Note: The mounting hole spacing on the MP1 casters differs slightly between the front and rear, so I made the holes slightly elongated to ensure the risers fit correctly in either orientation.
Freebord 5X risers – .STL files for printing 2.5, 5 and 7,5 mm risers with a flat or extra concave profile.
